• Gas Adsorption Analysis
Gas Adsorption Analyzers for Surface Area and Porosity Analysis
AMI gas adsorption analyzers measure surface area, pore size and pore volume for catalysts, adsorbents, battery materials and advanced powders. Compare static volumetric and high-throughput configurations to find the right system for your lab.
Surface area, pore size and pore volume in one run
Micropore, mesopore and vapor options
1- to 12-station configurations
Overview
What Is a Gas Adsorption Analyzer (Physisorption)?
A gas adsorption analyzer measures how much gas a solid takes up at different pressures while the temperature stays constant. Physisorption is the form of gas adsorption used to measure surface area and porosity. Gas molecules are held on the external surface and pore walls by weak, reversible van der Waals forces, so they are released again when the pressure drops.
Plotting the adsorbed amount against pressure produces an adsorption isotherm. From that curve, the analysis software calculates three properties that decide how a material performs:
- Specific surface area, which shows how much surface is available for adsorption or reaction
- Pore size distribution, which covers pores from about 0.35 nm up to roughly 400 nm
- Total pore volume, which shows how much gas or liquid the material can hold
AMI offers static volumetric analyzers for research-grade micropore work and high-throughput multi-station systems for routine quality control, so one supplier can cover the whole workflow.
Why It Matters
Why Gas Adsorption Analysis Matters
Surface area and porosity control how a material behaves in the real world. Physisorption analysis turns those hidden features into numbers you can compare from batch to batch.
Active Surface Area
Pore Accessibility and Selectivity
Storage and Adsorption Capacity
Consistent Quality
Control
Principle
How a Gas Adsorption Analyzer Works
Most AMI gas adsorption analyzers use the volumetric method. The instrument doses a known amount of gas into a closed system of known volume and calculates how much the sample adsorbed from the resulting pressure change.
Degas the sample
Dose the adsorbate
Collect the data
Data
Reading the Isotherm: From Pressure Curve to Pore Size
The shape of the isotherm points to the mechanism behind it. Micropore filling reflects the micropore structure. The multilayer region (typically P/P₀ 0.05 to 0.30, or lower for microporous samples using the Rouquerol criteria) gives the BET surface area. Capillary condensation gives the mesopore distribution and total pore volume. Differences between the adsorption and desorption branches, called hysteresis, give further clues about pore shape, classified by IUPAC as loop types H1 to H5 (for example cylindrical, slit-shaped or ink-bottle pores).
| Pore Class | Width | Fills at P/P0 | What You Learn |
|---|---|---|---|
| Micropores | Below 2 nm | Below about 0.1 (ultramicropores below about 10-5) | Micropore volume and size distribution, using t-plot and DFT analysis |
| Mesopores | 2 to 50 nm | About 0.4 to 0.95 (capillary condensation) | Mesopore size distribution and total pore volume, using BJH and DFT analysis |
| Macropores | Above 50 nm | Above about 0.95 | Contribution to total pore volume. Very large pores are usually covered by complementary techniques. |
Two analysis tools do most of the work. BET theory extends the Langmuir monolayer model to multilayer adsorption and converts the monolayer capacity into specific surface area. The t-plot compares your data to a reference thickness curve to separate micropore filling from adsorption on the external surface, which gives micropore volume and external surface area.
Choosing the Adsorbate Gas
| Gas | Typical Temperature | Best For | Notes |
|---|---|---|---|
| Nitrogen (N2) | 77 K | BET surface area, mesopore size, pore volume | Industry standard with widely comparable data, but limited access to the finest micropores |
| Argon (Ar) | 87 K | BET and micropore analysis, microporous and polar materials | No quadrupole moment, so no specific interaction with polar surface groups and a more reliable pore-size result. IUPAC recommends Ar at 87 K for micropores. Needs liquid argon or a cryocooler. |
| Carbon dioxide (CO2) | 273 K | Ultramicropore analysis in activated carbons, MOFs and narrow micropores below 0.7 nm | Fast diffusion at 273 K reaches pores below about 1 nm. Maximum P/P0 is about 0.03 at 1 atm, so not suitable for BET or mesopores. |
| Krypton (Kr) | 77 K | Low surface area BET, below about 5 m2/g, such as thin films, metals and coatings | Very high sensitivity, but not used for pore size |
| Methane (CH4) | Near ambient (e.g., 298 K), high pressure | Gas storage studies on energy storage materials | Relevant to real world gas adsorption, but not standard for surface area |
| Hydrogen (H2) | 77 K | Small pore and hydrogen storage research | Very small kinetic diameter; storage studies usually run at 77 K and high pressure. |
Applications
Applications of Gas Adsorption Analyzers
Catalysts
Zeolites
MOFs
Activated Carbons
Battery Materials
Product lineup
Gas Adsorption Analyzers from AMI Instruments
AMI builds a full range of gas adsorption analyzers, from compact micropore systems to modular multi-station platforms and high pressure sorption units. The product cards below sorts them by what they do best, and every card links to its own product page. Or browse the complete gas adsorption category. If you only need fast BET surface area results for QC, see our dedicated BET surface area analyzers.
Nexus Series
Integrated XRD–Sorption Analysis Platform
● Simultaneously collects XRD and gas/vapor sorption data.
● High-power X-ray source (600–1600 W) with ±0.01° angular accuracy.
● Fully automated intelligent workflow.
● Four model configurations (Nexus G Core, Nexus G Cryo, Nexus GV Core, Nexus GV Cryo).
Modular Multi-Station Surface Area & Pore Analysis System
● Configure mesopore, micropore, or mixed-mode stations in a single gas sorption analyzer.
● Run simultaneous, independent BET surface area, pore size, and adsorption isotherm analyses without cross-interference.
● Connect up to 3 units for as many as 12 analysis stations for high-throughput laboratories.
Synchronous, High-Throughput BET & Mesoporous Analysis
● Multi-port gas adsorption analyzer for simultaneous BET surface area, pore size, and porosity measurements.
● Complete up to 4 BET surface area measurements in approximately 20–30 minutes under optimized conditions.
● Designed for high-throughput gas physisorption analysis with BET repeatability within ±1.0%.
BTSorb 100 Series
Breakthrough Curve and Mass Transfer Analyzer
● Cost-effective dynamic sorption analyzer for breakthrough and adsorption studies.
● Multiple modes for competitive adsorption and diffusion coefficient measurements.
● User-friendly BTManager software with automated control and advanced data analysis.
Vapor Series
Volumetric Vapor Adsorption Analyzer
● Measure vapor adsorption and specific surface area simultaneously.
● Analyze up to 2 samples at once (1 vapor, 1 micropore).
● Configurable with 1 or 2 analysis stations to meet varying lab needs.
RuboSORP MPA Series
Automated High-Pressure Gas Sorption Analysis
● Wide pressure range: vacuum to 200 bar.
● Configurable with 1, 2, or 3 independent analysis stations.
● Optional BET surface area analysis capability for added versatility.
Micro 100
High-Resolution Micropore Characterization
● Available in multiple models to support diverse lab-throughput needs.
● 2 analysis stations with high-vacuum pump and up to 3 pressure sensors per station.
● Simultaneous testing with different adsorbate gases across all active stations.
Micro 200
High-Resolution Micropore Characterization
● Available in multiple models to support diverse lab-throughput needs.
● 2 analysis stations with high-vacuum pump and up to 3 pressure sensors per station.
● Simultaneous testing with different adsorbate gases across all active stations.
Real laboratory applications
Gas Adsorption Analysis in Real Laboratory Applications
These Technical Library articles show how physisorption data is collected and interpreted on real samples.
GAS ADSORPTION
How Pore Structure and Active Sites Affect Catalysts
GAS ADSORPTION
Potassium-Ion Battery Anode: Surface Area and Pore Structure
GAS ADSORPTION
Direct Air Capture CO2 Adsorbent Performance
Key Benefits
Advantages of AMI Gas Adsorption Analyzers
Complete Pore Analysis
Wide Material Compatibility
Scalable Throughput
Reliable, Reproducible Results
Why AMI
Why Choose AMI Instruments for Gas Adsorption Analysis
● A full range covering micropore, mesopore, vapor, high pressure and breakthrough analysis
● Multi-station systems that scale from 1 to 12 stations as your workload grows
● Options for both static volumetric and dynamic flow measurement
● Integrated XRD and sorption in the Nexus Series
● Built for research labs and industrial quality control alike
Get Started
Explore AMI Gas Adsorption Analyzers
Find the right physisorption system for your surface area and porosity work.
FAQs
Frequently Asked Questions
What is a gas adsorption analyzer used for?
A gas adsorption analyzer measures how much gas a material adsorbs at different pressures. From that isotherm it calculates specific surface area, pore size distribution and total pore volume for catalysts, adsorbents, battery materials and powders.
What is the difference between gas adsorption and physisorption?
Which gas is used in gas adsorption analysis?
What pore sizes can a physisorption analyzer measure?
Is volumetric or dynamic flow better?
Static volumetric systems give full isotherms and are the choice for pore size work and micropores. Dynamic flow systems such as the Surface DX Series suit fast, routine surface area checks in quality control.
How long does a gas adsorption analysis take?
It depends on the material. Quick surface area checks can take around 30 minutes, while microporous materials that need long equilibration can take up to 40 hours.