• Gas Adsorption Analysis

Gas Adsorption Analyzers for Surface Area and Porosity Analysis

AMI gas adsorption analyzers measure surface area, pore size and pore volume for catalysts, adsorbents, battery materials and advanced powders. Compare static volumetric and high-throughput configurations to find the right system for your lab.

adsorption-analyzer-hero
adsorption-analyzer-hero
lab

Surface area, pore size and pore volume in one run

Micropore, mesopore and vapor options

1- to 12-station configurations

Overview

What Is a Gas Adsorption Analyzer (Physisorption)?

A gas adsorption analyzer measures how much gas a solid takes up at different pressures while the temperature stays constant. Physisorption is the form of gas adsorption used to measure surface area and porosity. Gas molecules are held on the external surface and pore walls by weak, reversible van der Waals forces, so they are released again when the pressure drops.

Plotting the adsorbed amount against pressure produces an adsorption isotherm. From that curve, the analysis software calculates three properties that decide how a material performs:

AMI offers static volumetric analyzers for research-grade micropore work and high-throughput multi-station systems for routine quality control, so one supplier can cover the whole workflow.

Nexus Series Gas Adsorption

Why It Matters

Why Gas Adsorption Analysis Matters

Surface area and porosity control how a material behaves in the real world. Physisorption analysis turns those hidden features into numbers you can compare from batch to batch.

3

Active Surface Area

Shows how much surface is available for adsorption or reaction, so you can predict how well a material will perform.
4

Pore Accessibility and Selectivity

Pore size distribution shows which molecules can enter and how they move through the pores, which is key for separations and molecular sieving.
5

Storage and Adsorption Capacity

Total pore volume indicates how much gas, liquid or ion-carrying electrolyte the structure can hold.
6

Consistent Quality
Control

Repeatable surface area and porosity data supports R&D, batch release and regulatory documentation for material production.

Principle

How a Gas Adsorption Analyzer Works

Most AMI gas adsorption analyzers use the volumetric method. The instrument doses a known amount of gas into a closed system of known volume and calculates how much the sample adsorbed from the resulting pressure change.

Degas the sample

Heat the sample under vacuum or inert gas flow to remove moisture, air and other contaminants.

Dose the adsorbate

Cool the sample in a liquid nitrogen (or argon) bath, measure the free space, then dose a known amount of gas into the sample tube and record the equilibrium pressure.

Collect the data

Add successive doses and record each equilibrium pressure to build the adsorption isotherm against relative pressure (P/P₀), then reduce pressure step by step to record the desorption branch.

Data

Reading the Isotherm: From Pressure Curve to Pore Size

The shape of the isotherm points to the mechanism behind it. Micropore filling reflects the micropore structure. The multilayer region (typically P/P₀ 0.05 to 0.30, or lower for microporous samples using the Rouquerol criteria) gives the BET surface area. Capillary condensation gives the mesopore distribution and total pore volume. Differences between the adsorption and desorption branches, called hysteresis, give further clues about pore shape, classified by IUPAC as loop types H1 to H5 (for example cylindrical, slit-shaped or ink-bottle pores).

Pore Class Width Fills at P/P0 What You Learn
Micropores Below 2 nm Below about 0.1 (ultramicropores below about 10-5) Micropore volume and size distribution, using t-plot and DFT analysis
Mesopores 2 to 50 nm About 0.4 to 0.95 (capillary condensation) Mesopore size distribution and total pore volume, using BJH and DFT analysis
Macropores Above 50 nm Above about 0.95 Contribution to total pore volume. Very large pores are usually covered by complementary techniques.

Two analysis tools do most of the work. BET theory extends the Langmuir monolayer model to multilayer adsorption and converts the monolayer capacity into specific surface area. The t-plot compares your data to a reference thickness curve to separate micropore filling from adsorption on the external surface, which gives micropore volume and external surface area.

Choosing the Adsorbate Gas

Gas Typical Temperature Best For Notes
Nitrogen (N2) 77 K BET surface area, mesopore size, pore volume Industry standard with widely comparable data, but limited access to the finest micropores
Argon (Ar) 87 K BET and micropore analysis, microporous and polar materials No quadrupole moment, so no specific interaction with polar surface groups and a more reliable pore-size result. IUPAC recommends Ar at 87 K for micropores. Needs liquid argon or a cryocooler.
Carbon dioxide (CO2) 273 K Ultramicropore analysis in activated carbons, MOFs and narrow micropores below 0.7 nm Fast diffusion at 273 K reaches pores below about 1 nm. Maximum P/P0 is about 0.03 at 1 atm, so not suitable for BET or mesopores.
Krypton (Kr) 77 K Low surface area BET, below about 5 m2/g, such as thin films, metals and coatings Very high sensitivity, but not used for pore size
Methane (CH4) Near ambient (e.g., 298 K), high pressure Gas storage studies on energy storage materials Relevant to real world gas adsorption, but not standard for surface area
Hydrogen (H2) 77 K Small pore and hydrogen storage research Very small kinetic diameter; storage studies usually run at 77 K and high pressure.

Applications

Applications of Gas Adsorption Analyzers

Catalysts

Higher surface area and the right pore size give more active sites and better mass transfer.

Zeolites

Pore uniformity is critical for molecular sieving and separations.

MOFs

Tunable porosity supports targeted gas storage and separation, and micropore analysis confirms the structure.

Activated Carbons

Tailored micropore and mesopore balance controls how well a carbon captures pollutants or gases.

Battery Materials

Controlled porosity improves ion transport and electrode–electrolyte contact, while limiting excess surface that adds first-cycle loss.
Nexus Series Gas Adsorption

Product lineup

Gas Adsorption Analyzers from AMI Instruments

AMI builds a full range of gas adsorption analyzers, from compact micropore systems to modular multi-station platforms and high pressure sorption units. The product cards below sorts them by what they do best, and every card links to its own product page. Or browse the complete gas adsorption category. If you only need fast BET surface area results for QC, see our dedicated BET surface area analyzers.

Real laboratory applications

Gas Adsorption Analysis in Real Laboratory Applications

These Technical Library articles show how physisorption data is collected and interpreted on real samples.

GAS ADSORPTION

How Pore Structure and Active Sites Affect Catalysts

See how surface area and pore size shape catalyst activity and mass transfer.

GAS ADSORPTION

Potassium-Ion Battery Anode: Surface Area and Pore Structure

Learn how physisorption data links hard carbon pore structure to battery anode performance.

GAS ADSORPTION

Direct Air Capture CO2 Adsorbent Performance

A look at how adsorption behavior is measured and compared for a CO2 capture material.

Key Benefits

Advantages of AMI Gas Adsorption Analyzers

8

Complete Pore Analysis

Surface area, pore volume, and micropore and mesopore distributions from one isotherm.
10

Wide Material Compatibility

Suited to catalysts, zeolites, MOFs, carbons, battery materials and advanced powders.
9

Scalable Throughput

Choose anything from two-station micropore systems to multi-station platforms with up to 12 stations.
11

Reliable, Reproducible Results

Equilibrium-based measurement gives stable data you can compare from batch to batch.

Why AMI

Why Choose AMI Instruments for Gas Adsorption Analysis

● A full range covering micropore, mesopore, vapor, high pressure and breakthrough analysis

● Multi-station systems that scale from 1 to 12 stations as your workload grows

● Options for both static volumetric and dynamic flow measurement

● Integrated XRD and sorption in the Nexus Series

● Built for research labs and industrial quality control alike

Sync 400 & Matrix 1000

Get Started

Explore AMI Gas Adsorption Analyzers

Find the right physisorption system for your surface area and porosity work.

FAQs

Frequently Asked Questions

A gas adsorption analyzer measures how much gas a material adsorbs at different pressures. From that isotherm it calculates specific surface area, pore size distribution and total pore volume for catalysts, adsorbents, battery materials and powders.

They describe the same technique. Gas adsorption is the general name, and physisorption stresses that the gas is held by weak, reversible van der Waals forces instead of chemical bonds.
Nitrogen at 77 K is the standard. Argon at 87 K suits microporous and polar materials, carbon dioxide at 273 K reaches ultramicropores, and krypton suits samples with very low surface area. See the table above, or read about BET surface area analyzers for systems focused on surface area.
Gas adsorption covers pores from about 0.35 nm to roughly 400 nm, which spans micropores below 2 nm, mesopores from 2 to 50 nm and part of the macropore range.

Static volumetric systems give full isotherms and are the choice for pore size work and micropores. Dynamic flow systems such as the Surface DX Series suit fast, routine surface area checks in quality control.

It depends on the material. Quick surface area checks can take around 30 minutes, while microporous materials that need long equilibration can take up to 40 hours.

Moisture and contaminants block surface and pores. Poor degassing underestimates surface area and pore volume, and over-degassing can damage the sample, so time, temperature and vacuum need to suit the material.
Start with your material, the results you need, your daily sample count and the sample form. Use the product cards above or browse the full gas adsorption category, and contact AMI if you want help matching a system to your lab.
BET Analyzer
Find the Right Gas Adsorption System Tell us about your materials and measurement needs. Our team can help you choose the right analyzer.
Request a Quote ➜