Product Catalog

Product Category

Industry

AMI 300 SSITKA

Steady-state Isotope Transient Kinetic Analysis

● Automated chemisorption analyzer with integrated SSITKA (Steady-state Isotopic Transient Kinetic Analysis) functionality.

● Enables detailed investigation of catalytic mechanisms, intermediate lifetimes, and surface kinetics.

● Features precise pressure equalization for rapid and accurate isotopic switching.

● Precise gas control via 4 MFCs and 12 gas inlets for complex experiment designs.

● Broad temperature control: RT to1200°C (standard), Optional-130°C to1200°C.

● High reproducibility for automated loop injections with insulated valve box and TCD.

● Optional upgrades: vapor dosing mass spectrometry, and in-situ FTIR.

AMI-300HP

High-Pressure Dynamic Chemisorption

● Automatic chemisorption analyzer with pressure capability up to 100 bar for advanced reaction studies.

● Precise gas control via 3 MFCs (optional 4) and 4 standard gas inlets (expandable to 10 or 12).

● Broad temperature range: ambient to1200°C (optional-130°C low-temp configuration).

● Comprehensive three-layered safety system with integrated pressure relief valve.

● Optional modules include atmospheric vapor dosing and liquid-phase sampling.

AMI-300IR

In-Situ Chemisorption Meets Spectroscopy – Uncover Surface Reactions in Real Time

● Fully automated chemisorption analyzer with integrated FTIR detection.

● Enables real-time monitoring of dynamic surface adsorbates during adsorption and desorption.

● Reveals adsorption–reaction synergy and captures transient intermediates for mechanistic insight.

● Precise gas control via 3 MFCs (optional 4) and 10 gas inlets (expandable to 12).

● Broad temperature control range: RT to 1200°C (standard), Optional –130°C to 1200°C.

● Optional modules available: vapor dosing, mass spectrometry, and more…

AMI Family: Chemisorption

● Combines a variety of temperature-programmed techniques, including, TPD, TPO,TPR, and TPRx.

BUILD MY SYSTEM

AMI-Sync Series

Synchronous, High-Throughput BET & Mesoporous Analysis

● Synchronous multi-port design enables simultaneous BET and porosity measurements across 1, 2, 4, 8, or 12 analysis stations.

● Perform 4 BET measurements in approximately 20-30 minutes under fully optimized conditions.

● BET repeatability of ≤ +1.0% ensures high accuracy and reproducibility.

● Flexible configuration with optional degassers, multi-channel gas inlets, and thermostatic water baths for full system integration.

Matrix 1000 Series

Modular Multi-Station Surface Area & Pore Analysis System

● Configure mesopore, micropore, or mixed-mode stations in a single unit to match experimental needs

● Surface area can be measured down to 0.05 m²/g (mesopore) and 0.0005 m²/g (micropore), Pore size ranges from 0.35 to 500 nm

● Run simultaneous, independent analyses without cross-interference

● Expand modularly to a total of up to 3 connected units (12 stations) for maximum throughput and flexibility

● Harsh Chemistry Option: Equipped with a passivation coating and seals upgraded to FFKM for aggressive or corrosive chemistries.

● Built-in, high-temperature degassing furnace with programmable ramp/soak control and real-time pressure feedback

BTSorb 100 Series

Breakthrough Curve and Mass Transfer Analyzer

● Performs breakthrough curve testing and multi-component competitive adsorption.

● Optional analysis of mass transfer performance, including diffusion coefficients via chromatography and ZLC methods.

● Supports PSA, TSA, and liquid-phase sorption experiments.

● Stable, constant-temperature system for reproducible results.

● Operates up to 100 bar for high-pressure gas separations.

● Optional configurations include vapor handling, integrated mass spectrometry, and sulfur-resistant corrosion protection.

Vapor Series

Volumetric Vapor Adsorption Analyzer

● Simultaneously perform vapor adsorption, specific surface area, and pore size distribution measurements.

● Independent high-vacuum analysis pathways for vapor, BET surface area, and micropore characterization.

● Analyze up to 2 samples at once (1 vapor, 1 micropore) with fully independent stations.

● Configurable with 1 or 2 analysis stations to meet varying lab needs.

● Includes cold trap, integrated constant-temperature valve box, and illuminated valve status indicators.