µBenchCAT System Builder

Custom-designed microreactors, which are fully automated and designed for unattended operation.

1. Overall System Specifications

Temperature:

Maximum Allowable

Normal Operating

°C °F

Pressure:

Maximum Allowable

Normal Operating

psig barg

2. Gas Feeds

	Flow Range (Sccm)	Typical Flow (Sccm)¹	Gas Type

Automated positive shut off valves required after each gas flow controller

Yes No

3. Liquid Feeds

Feed tank:

Volume

Liters

Tank / feed line heating:

Yes No

Temp

°C

Blanketing with inert gas:

Yes No

	Flow Range (mL/min)	Typical Flow (mL/min)	Liquid to be Used
Liquid 1
Liquid 2

Pump Preference²:

Liquid 1:

HPLC Syringe pump

Liquid 2:

HPLC Syringe pump

4. Reactor Configuration

Size OD (in):

0.25 0.375 0.5 0.75 Other

Reactor Material:

Quartz 316SS Inconel

5. Gas Liquid Separator

None One Stage Two Stage Three Stage

6. GC Gas Sampling Line Options

None Unheated after Pressure Reduction Heated Slip Stream

¹ This information is required for sizing the mass flow controllers. Please note that mass flow controllers will typically only deliver accurately in the 5 – 95% range of the full scale and that their reproducibility and accuracy is limited to 1% of full scale.

² Syringe pumps can precisely deliver very low flows over a wide range with high accuracy, but are significantly more expensive than piston pumps.

System Summary

Your configured µBenchCAT specifications will appear here as you make selections.

µBenchCAT System Builder

System Summary

Contact Information